2021 Good Quality Alloy 316 Flanges - Titanium Bar – Sekonic
2021 Good Quality Alloy 316 Flanges - Titanium Bar – Sekonic Detail:
Titanium bar and Titanium Rod can be used in the drawing parts for its good elongation and excellent corrosion-resistance and most widely applied in pressure,vessel and used in some fittings parts and fastening pieces, like titanium fasteners. Titanium bar and titanium rod also can be widely used in the titanium alloys because of its comprehensive mechanical and chemical properties. In addition, titanium bar and titanium rod can be used in the golf clubs and bicycle girders and medical appliance.
Two types of Titanium rods are available: pure Titanium rods and Titanium alloy rods such as Ti-6AI-4V. They can be used in aircraft engines and parts, chemical equipment parts (reactors, pipes, heat exchangers and valves, etc.), ship hulls, bridges, medical implants, artificial bones, sporting products and consumer goods.
• Tittanium Bar Materials: Grade1, Grade 2, Grade 5, Grade 5, Grade7 ,Grade9,Grade11, Grade12, Grade 16, Grade23 ect
• Bar Shapes: Round Bar, Flat Bar, Hex Bar, Square bar
• Diameter:2.0mm-320mm, Length: 50mm-6000mm, Customized
• Conditions: Hot Forging & Hot Rolling,Cold Rolled, Annealed
• Standards: ASTMB348, AMS4928, AMS 4931B, ASTM F67, ASTM F136 etc
| Titanium Alloys Material Common Name | ||
|
Gr1 |
UNS R50250 |
CP-Ti |
|
Gr2 |
UNS R50400 |
CP-Ti |
|
Gr4 |
UNS R50700 |
CP-Ti |
|
Gr7 |
UNS R52400 |
Ti-0.20Pd |
|
G9 |
UNS R56320 |
Ti-3AL-2.5V |
|
G11 |
UNS R52250 |
Ti-0.15Pd |
|
G12 |
UNS R53400 | Ti-0.3Mo-0.8Ni |
|
G16 |
UNS R52402 | Ti-0.05Pd |
|
G23 |
UNS R56407 |
Ti-6Al-4V ELI |
♦ Titanium Bar Chemical Composition ♦
|
Grade |
Chemical composition, weight percent (%) |
||||||||||||
|
C (≤) |
O (≤) |
N (≤) |
H (≤) |
Fe (≤) |
Al |
V |
Pd |
Ru |
Ni |
Mo |
Other Elements Max. each |
Other Elements Max. total |
|
|
Gr1 |
0.08 |
0.18 |
0.03 |
0.015 |
0.20 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr2 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr4 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr5 |
0.08 |
0.20 |
0.05 |
0.015 |
0.40 |
5.5 6.75 |
3.5 4.5 |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr7 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
0.12 0.25 |
— |
0.12 0.25 |
— |
0.1 |
0.4 |
|
Gr9 |
0.08 |
0.15 |
0.03 |
0.015 |
0.25 |
2.5 3.5 |
2.0 3.0 |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr11 |
0.08 |
0.18 |
0.03 |
0.15 |
0.2 |
— |
— |
0.12 0.25 |
— |
— |
— |
0.1 |
0.4 |
|
Gr12 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
— |
— |
0.6 0.9 |
0.2 0.4 |
0.1 |
0.4 |
|
Gr16 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
0.04 0.08 |
— |
— |
— |
0.1 |
0.4 |
|
Gr23 |
0.08 |
0.13 |
0.03 |
0.125 |
0.25 |
5.5 6.5 |
3.5 4.5 |
— |
— |
— |
— |
0.1 |
0.1 |
♦ Titanum Alloy Bars Physical Properties ♦
|
Grade |
Physical properties |
|||||
|
Tensile strength Min |
Yield strength Min (0.2%,offset) |
Elongation in 4D Min (%) |
Reduction of Area Min (%) |
|||
|
ksi |
MPa |
ksi |
MPa |
|||
|
Gr1 |
35 |
240 |
20 |
138 |
24 |
30 |
|
Gr2 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr4 |
80 |
550 |
70 |
483 |
15 |
25 |
|
Gr5 |
130 |
895 |
120 |
828 |
10 |
25 |
|
Gr7 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr9 |
90 |
620 |
70 |
483 |
15 |
25 |
|
Gr11 |
35 |
240 |
20 |
138 |
24 |
30 |
|
Gr12 |
70 |
483 |
50 |
345 |
18 |
25 |
|
Gr16 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr23 |
120 |
828 |
110 |
759 |
10 |
15 |
♦ ♦ ♦ Titanium Alloy Materials Features: ♦ ♦ ♦
• Grade 1: Pure Titanium, relatively low strength and high ductility.
• Grade 2: The pure titanium most used. The best combination of strength
• Grade 3: High strength Titanium, used for Matrix-plates in shell and tube heat exchangers
• Grade 5: The most manufactured titanium alloy. Exceedingly high strength. high heat resistance.
• Grade 7: Superior corrosion resistance in reducing and oxidizing environments.
• Grade 9: Very high strength and corrosion resistance.
• Grade 12: Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11.
• Grade 23: Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant application.
Product detail pictures:
Related Product Guide:
Why Cobalt based Alloys
Why Nickel Based Alloys ?
With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for 2021 Good Quality Alloy 316 Flanges - Titanium Bar – Sekonic , The product will supply to all over the world, such as: Sri Lanka, Bangkok, Peru, It using the world's leading system for reliable operation, a low failure rate, it suitable for Argentina customers choice. Our company is situated within the national civilized cities, the traffic is very convenient, unique geographical and economic conditions. We pursue a people-oriented, meticulous manufacturing, brainstorm, build brilliant" business philosophy. Strict quality management, perfect service, reasonable price in Argentina is our stand on the premise of competition. If necessary, welcome to contact us by our website or phone consultation, we'll be happy to serve you.
By Lindsay from Qatar - 2017.09.09 10:18
Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.
By Mag from Liverpool - 2018.12.28 15:18
