2021 Good Quality Alloy 316 Flanges - Titanium Strip and Foil – Sekonic
2021 Good Quality Alloy 316 Flanges - Titanium Strip and Foil – Sekonic Detail:
• Tittanium Strip and Foil Materials: Pure Titanium(CP) and Titanium alloy foil,Grade1, Grade 2, Grade 5, Grade 5, Grade 7 and Grade 9
• Forms: Single strip, in coil, or on spool. Slitting service available
• Dimension: Thickness: ≥0.01mm : 20～1000mm, Length: As the Request
• Conditions: Cold rolled(Y)~Hot rolled(R)~Annealed (M)~Solid Status
• Standards: ASTM B265, AMS 4911, AMS 4902, ASTM F67, ASTM F136 etc
• Appilications：Electronics, chemicals, watches, glasses, jewelry, sporting goods, machinery, plating equipment, environmental equipment, golf and precision machining industries.
| Titanium Alloys Material Common Name | ||
|
Gr1 |
UNS R50250 |
CP-Ti |
|
Gr2 |
UNS R50400 |
CP-Ti |
|
Gr4 |
UNS R50700 |
CP-Ti |
|
Gr7 |
UNS R52400 |
Ti-0.20Pd |
|
G9 |
UNS R56320 |
Ti-3AL-2.5V |
|
G11 |
UNS R52250 |
Ti-0.15Pd |
|
G12 |
UNS R53400 | Ti-0.3Mo-0.8Ni |
|
G16 |
UNS R52402 | Ti-0.05Pd |
|
G23 |
UNS R56407 |
Ti-6Al-4V ELI |
Titanium Strip and Foil : We mainly provide pure titanium Strip of Gr1, Gr2, Gr4 grades; For titanium alloy Foil, We mainly provide Gr5, Gr7, Gr9, Gr11, Gr12, Gr16, Gr23 and other grades,They are produced on the basis of titanium plate with further cold rolling; the production process of titanium sheet is more complicated. The deformation control is more strictly in the process of rolling.That can be cut in different sizes according to the customer’s needs, greatly shorten the time of delivery.
♦ Titanium Strip Chemical composition ♦
|
Grade |
Chemical composition, weight percent (%) |
||||||||||||
|
C (≤) |
O (≤) |
N (≤) |
H (≤) |
Fe (≤) |
Al |
V |
Pd |
Ru |
Ni |
Mo |
Other Elements Max. each |
Other Elements Max. total |
|
|
Gr1 |
0.08 |
0.18 |
0.03 |
0.015 |
0.20 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr2 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr4 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr5 |
0.08 |
0.20 |
0.05 |
0.015 |
0.40 |
5.5 6.75 |
3.5 4.5 |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr7 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
0.12 0.25 |
— |
0.12 0.25 |
— |
0.1 |
0.4 |
|
Gr9 |
0.08 |
0.15 |
0.03 |
0.015 |
0.25 |
2.5 3.5 |
2.0 3.0 |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr11 |
0.08 |
0.18 |
0.03 |
0.15 |
0.2 |
— |
— |
0.12 0.25 |
— |
— |
— |
0.1 |
0.4 |
|
Gr12 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
— |
— |
0.6 0.9 |
0.2 0.4 |
0.1 |
0.4 |
|
Gr16 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
0.04 0.08 |
— |
— |
— |
0.1 |
0.4 |
|
Gr23 |
0.08 |
0.13 |
0.03 |
0.125 |
0.25 |
5.5 6.5 |
3.5 4.5 |
— |
— |
— |
— |
0.1 |
0.1 |
♦ Titanum Alloy Strip Physical properties♦
|
Grade |
Physical properties |
|||||||
|
Tensile strength Min |
Yield strength Min (0.2%,offset) |
Elongation in 4D Min (%) |
Reduction of Area Min (%) |
Bend Test(Radius of Mandrel) |
||||
|
ksi |
MPa |
ksi |
MPa |
＜1.8mm In thicknes |
1.8-4.8mm In thickness | |||
|
Gr1 |
35 |
240 |
20 |
138 |
24 |
30 |
1.5T | 2.0T |
|
Gr2 |
50 |
345 |
40 |
275 |
20 |
30 |
2.0T | 2.5T |
|
Gr4 |
80 |
550 |
70 |
483 |
15 |
25 |
2.5T | 3.0T |
|
Gr5 |
130 |
895 |
120 |
828 |
10 |
25 |
4.5T | 5.0T |
|
Gr7 |
50 |
345 |
40 |
275 |
20 |
30 |
2.0T | 2.5T |
|
Gr9 |
90 |
620 |
70 |
483 |
15 |
25 |
2.5T | 3.0T |
|
Gr11 |
35 |
240 |
20 |
138 |
24 |
30 |
1.5T | 2.0T |
|
Gr12 |
70 |
483 |
50 |
345 |
18 |
25 |
2.0T | 2.5T |
|
Gr16 |
50 |
345 |
40 |
275 |
20 |
30 |
2.0T | 2.5T |
|
Gr23 |
120 |
828 |
110 |
759 |
10 |
15 |
4.5T | 5.0T |
♦ ♦ ♦ Titanium Alloy Materials Features: ♦ ♦ ♦
• Grade 1: Pure Titanium, relatively low strength and high ductility.
• Grade 2: The pure titanium most used. The best combination of strength
• Grade 3: High strength Titanium, used for Matrix-plates in shell and tube heat exchangers
• Grade 5: The most manufactured titanium alloy. Exceedingly high strength. high heat resistance.
• Grade 7: Superior corrosion resistance in reducing and oxidizing environments.
• Grade 9: Very high strength and corrosion resistance.
• Grade 12: Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11.
• Grade 23: Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant application.
Product detail pictures:
Related Product Guide:
Why Nickel Based Alloys ?
electropolished
We have been ready to share our knowledge of internet marketing worldwide and recommend you suitable merchandise at most aggressive rates. So Profi Tools present you very best price of money and we are ready to develop alongside one another with 2021 Good Quality Alloy 316 Flanges - Titanium Strip and Foil – Sekonic , The product will supply to all over the world, such as: Turkey, Anguilla, Libya, Since the establishment of our company, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between global suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it.
By Louise from South Africa - 2018.06.28 19:27
This company can be well to meet our needs on product quantity and delivery time, so we always choose them when we have procurement requirements.
By Claire from Florida - 2018.12.14 15:26
