China Cheap price Stellite Shaft Sleeve – Stainless Steel F53 (2507) – Sekonic

Product Detail

We support our purchasers with ideal high-quality merchandise and significant level company. Becoming the specialist manufacturer in this sector, we now have received loaded practical encounter in producing and managing for Umco50 Slide pad for heat furnace, 17-4PH SPRING, Nitronic 60 rod, Only for accomplish the good-quality product or service to satisfy customer's demand, all of our products have been strictly inspected before shipment.

China Cheap price Stellite Shaft Sleeve – Stainless Steel F53 (2507) – Sekonic Detail:

Common Trade Names: F53, AISI 2507,UNS S32750, W.Nr 1.4410

F53 is a duplex (austenitic-ferritic) stainless steel containing about 40 – 50% ferrite in the annealed condition. 2205 has been a practical solution to chloride stress corrosion cracking problems experienced with 304/304L or 316/316L stainless. The high chromium, molybdenum and nitrogen contents provide corrosion resistance superior to 316/316L and 317L stainless in most environments. 2507 is not suggested for operating temperatures up to 600°F

Stainless Steel F53 (2507) Chemical Composition

Alloy	%	Ni	Cr	Mo	N	C	Mn	Si	S	P	Cu
F53	Min.	6	24	3	0.24
F53	Max.	8	26	5	0.32	0.03	1.2	0.08	0.02	0.035	0.5

Stainless Steel F53 (2507) Physical Properties

Density	8.0 g/cm³
Melting point	1320-1370 ℃

Stainless Steel F53 (2507) Mechanical Properties

Alloy status

Tensile strength
Rm N/mm²

Yield strength

RP0.2 N/mm²

Elongation
A5 %

Brinell hardness HB

Solution treatment

800

550

310

Stainless Steel F53(2507) Standards and Specifications

ASME SA 182, ASME SA 240, ASME SA 479, ASME SA 789, ASME SA 789 Section IV Code Case 2603

ASTM A 240, ASTM A 276, ASTM A 276 Condition A, ASTM A 276 Condition S, ASTM A 479, ASTM A 790
NACE MR0175/ISO 15156

F53 (2507) Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

F53 Bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

welding wire and spring wire

F53 Wire

Supply in welding wire and spring wire in coil form and cut length.

Sheet & Plate

F53 sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.

F53 seamless tube & Welded pipe

Standards size and customized dimension can be produced by us with small tolerance

inconel strip,invar stirp,kovar stirp

F53 strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Fasterner & Other Fitting

F53 Fasteners

This materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Why Stainless Steel F53 (2507) ?

F53(S32760 ) combines high mechanical strength and good ductility with corrosion resistance to marine environments and performs at ambient and sub zero temperatures. High resistance to abrasion, erosion and cavitation erosion and also used in sour service operation

Stainless Steel F53 (2507) Application field：

Primarily used for oil & gas and marine applications being typically used for pressure vessels, valves chokes, Xmas trees, flanges and pipework

Product detail pictures:

Related Product Guide:
Why Nickel Based Alloys ?
Special Materials we offer

The customer satisfaction is our primary goal. We uphold a consistent level of professionalism, quality, credibility and service for China Cheap price Stellite Shaft Sleeve – Stainless Steel F53 (2507) – Sekonic , The product will supply to all over the world, such as: Mauritius, Turkmenistan, Netherlands, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

4j36 Plate