Factory Price Tubesheet - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic

Product Detail

We can easily normally satisfy our respected buyers with our excellent high-quality, excellent selling price and good service due to we've been far more expert and more hard-working and do it in cost-effective way for inconel 925 bar, 17-4PH Stainless steel, inconel 600 bolt, We sincerely hope to establish some satisfactory relationships with you in the near future. We will keep you informed of our progress and look forward to building steady business relations with you.

Factory Price Tubesheet - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic Detail:

Common Trade Names: 13-8Mo, PH13-8Mo, S51380, 04Cr13Ni8Mo2Al, xm-13,UNS S13800,Werkstoff 1.4548

PH13-8Mo stainless is a martensitic precipitation hardening stainless steel that has excellent strength, high hardness, superior toughness and good corrosion resistance. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content, and vacuum melting. Typical applications are large airframe structural components and injection molding equipment.

PH13-8Mo Chemical Compositons

C	Cr	Ni	Mo	Si	Mn	P	S	Al	N	Fe
≤ 0.05	12.25 13.25	7.5 8.5	2.0 2.5	≤ 0.1	≤ 0.2	≤ 0.01	≤ 0.008	0.9 1.35	≤ 0.01	Bal

PH13-8Mo Physical Properties

Density (g/cm³)	Melting point (℃)
7.76	1404-1471

PH13-8Mo Alloy Typical Mechanical Properties

Strength varies with heat treatment condition. The following table shows minimum mechanical properties for the various aged conditions, per AMS 5864

	H950	H1000	H1025	H1050	H1100	H1150
0.2 Offset Yield Strength, ksi	205	190	175	165	135	90
Ultimate Tensile Strength, ksi	220	205	185	175	150	135
Elongation in 2″, %	10	10	11	12	14	14
Reduction of Area, % (Longitudinal)	45	50	50	50	50	50
Reduction of Area, % (Transverse)	45	50	50	50	50	50
Reduction of Area, % (Short-Transverse)	35	40	45	45	50	50
Min Hardness, Rockwell	45	43	-	40	34	30

PH 13-8Mo Standards and Specifications

AMS 5629,ASTM A 564,EN 1.4548,UNS S13800,Werkstoff 1.4548

PH 13-8Mo Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

PH 13-8Mo Bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

Sheet & Plate

PH 13-8Mo sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.

inconel strip,invar stirp,kovar stirp

PH 13-8Mo strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Why PH13-8Mo ?

• High strength, good fracture toughness, transverse mechanical properties and stress corrosion resistance in Marine environment.
• Weldability：By an inert gas protection welding, also using most of the other welding process, including plasma welding, electron beam welding, And argon shielding gas is preferred.

PH13-8Mo Application field：

Widely used in aerospace, nuclear reactors and petrochemical and other fields, such as cold heading fasteners and
machining, aircraft components, reactor components and petrochemical equipment.

Product detail pictures:

Related Product Guide:
electropolished
Special Materials we offer

We enjoy a very good reputation among our customers for our excellent product quality, competitive price and the best service for Factory Price Tubesheet - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic , The product will supply to all over the world, such as: Ukraine, Bangladesh, Finland, We have more than 200 staff including experienced managers, creative designers, sophisticated engineers and skilled workers. Through hard work of all employees for the past 20 years own company grew stronger and stronger. We always apply the "client first" principle. We also always fulfill all contracts to the point and therefore enjoy excellent reputation and trust among our customers. You are very welcome to personally visit our company.We hope to start a business partnership on the basis of mutual benefit and successful development . For more information please do no hesitate to contact us..

4j36 Plate