Factory source Umco50 - Stainless steel 17-7PH – Sekonic

Product Detail

We're going to commit ourselves to giving our esteemed customers along with the most enthusiastically considerate providers for F55 Manufacture, Hastelloy C-4, Hastelloy X Sheet, With the eternal goal of "continuous quality improvement, customer satisfaction", we are sure that our product quality is stable and reliable and our products are best-selling at home and abroad.

Factory source Umco50 - Stainless steel 17-7PH – Sekonic Detail:

Common Trade Names: 17-7PH,SUS631,S17700,07Cr17Ni7Al,W.Nr.1.4568

17-7PH is austenitic-martensitic precipitation hardening stainless steel developed on the basis of 18-8CrNi, also known as controlled phase change stainless steel.At the solution treating temperature, 1900°F, the metal is austenitic but undergoes transformation to a low-carbon martensitic structure during cooling to room temperature. This transformation is not complete until the temperature drops to 90°F. Subsequent heating to temperatures of 900-1150°F for one to four hours precipitation strengthens the alloy. This hardening treatment also tempers the martensitic structure, increasing ductility and toughness

17-7PH Chemical Composition

C	Cr	Ni	Si	Mn	P	S	Al
≤0.09	16.0-18.0	6.5-7.75	≤1.0	≤1.0	≤0.04	≤0.03	0.75-1.5

17-7PH Physical Properties

Density (g/cm3)	Melting point（℃）
7.65	1415-1450

17-7PH Mechanical Properties

Condition		бb/N/mm²	б0.2/N/mm²	δ5/%	ψ	HRW
Solution treatment		≤1030	≤380	20	－	≤229
Precipitationhardening	510℃ageing	1230	1030	4	10	≥383
Precipitationhardening	565℃ageing	1140	960	5	25	≥363

17-7PH Standards and Specifications

AMS 5604, AMS 5643, AMS 5825,ASME SA 564, ASME SA 693, ASME SA 705, ASME Type 630,ASTM A 564, ASTM A 693, ASTM A 705, ASTM Type 630

Condition A – H1150,ISO 15156-3,NACE MR0175,S17400,UNS S17400,W. Nr./EN 1.4548

Bar/Rod

Wire

Strip/Coil

Sheet/Plate

Pipe/Tube

17-7PH Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

17-7PH Bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

welding wire and spring wire

17-7PH Wire

Supply in welding wire and spring wire in coil form and cut length.

Sheet & Plate

17-7PH sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.

17-7PH seamless tube & Welded pipe

Standards size and customized dimension can be produced by us with small tolerance

inconel strip,invar stirp,kovar stirp

17-7PH strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Fasterner & Other Fitting

17-7PH Fasteners

17-7PH materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Why 17-7 PH?

• High tensile strength and hardness to 600°F
• Corrosion resistant
• Excellent oxidation resistance to about 1100°F
• Creep-rupture strength to 900°F

17-7 PHApplication field：

• Gate valves
• Chemical processing equipment
• Pump shafts, gears, plungers
• Valve stems, balls, bushings, seats
• Fasteners

Product detail pictures:

Related Product Guide:
Why Cobalt based Alloys
Why Nickel Based Alloys ?

As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Factory source Umco50 - Stainless steel 17-7PH – Sekonic , The product will supply to all over the world, such as: Austria, Switzerland, Brisbane, we are now looking forward to even greater cooperation with overseas customers based on mutual benefits. We will work wholeheartedly to improve our products and services. We also promise to work jointly with business partners to elevate our cooperation to a higher level and share success together. Warmly welcome you to visit our factory sincerely.

17-7ph