Haynes 25 (Alloy L605-Co350) Welding Wire

Product Detail

alloy L605 Wire

Haynes 25 (Alloy L605) Welding Wire

  Size: Dimater 0.05mm-8.0mm

♦  Condition: Cut length, Coil Spoil 

  Application for : Welding

♦  Sample order 30KG can be accept 

Delievery Date :15-25days

Haynes® 25 (L-605) is a cobalt based alloy that combines good forming and excellent high temperature properties. The alloy is resistant to oxidation and carburization to 1900 °F. Alloy 25 can only be hardened significantly by cold working. Cold working will increase creep strength up to 1800 °F and stress rupture strength uo to 1500 °F. Strain aging at 700 - 1100 °F improve creep and stress rupture strengths below 1300 °F.

Haynes 25 Chemical Composition
Alloy

%

Ni

Cr

Co

Mn

Fe

C

Si

S

P

W

Haynes 25

Min.

9.0

19.0

balance

1.0 - 0.05 - - -

14.0

Max.

11.0

21.0 2.0 3.0 0.15 0.4 0.03 0.04 16.0
Haynes 25 Physical Properties
Density
9.13 g/cm³
Melting point
1330-1410 ℃
Haynes 25 Mechanical Properties
Status
Tensile strength 
Rm N/mm²
Yield strength 
Rp 0. 2N/mm²
Elongation 
As %
Brinell hardness
HB
Solution treatment
960
340
35
≤282

 

Haynes 25 Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

Haynes 25 bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

welding wire and spring wire

Haynes 25 welding wire

Supply in welding wire and spring wire in coil form and cut length.

Nimonic 80A, iNCONEL 718, iNCONEL 625, incoloy 800

Haynes 25 Forging Ring

Forging Ring or gasket,size can be customized with bright surface and precision tolerance

Sheet & Plate

Haynes 25 sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.

Haynes 25 seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

inconel strip,invar stirp,kovar stirp

Haynes 25 strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Fasterner & Other Fitting

Haynes 25 Fasteners

Haynes 25 materials  in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Why Haynes 25 ?

1. Medium endurance and creep strength below 815.
2. Excellent oxidation resistance below 1090℃.
3. Satisfactory forming, welding and other technological properties.

Haynes 25 Application field:

Haynes 25 has given good service in many jet engine parts. Some of these include turbine blades, combustion chambers, afterburner parts, and turbine rings. The alloy has also been used successfully in a variety of industrial furnace applications including furnace muffles and liners in critical spots in high temperature kilns.

 


  • Previous:
  • Next:

  • Write your message here and send it to us