High temperature Spring Inconel X-750 Spring
Inconel X-750 Spring
♦ Spring Type: Wave Spring, DISC Spring
√ Compression Springs √ Extension spring
√ Torsion Spring √ Bending spring
♦ Size: as clients requirements
♦ Standards: AMS5669
Inconel® X-750 is a nickel chromium alloy made precipitation hardenable by the additions of Titanium and aluminum. It has been used in high temperature structural parts such as QAS turbines, jet engine components, nuclear power plant applications, heat treatment fixtures, forming tools and extrusion dies.The alloy is highly resistant to chemical corrosion and oxidation, and has high stress endurance strength and low creep rate at high stress conditions up to 1500°F(816°C) after proper heat treatment.Inconel X-750 can be processed using traditional techniques for iron-based alloys.
| Alloy |
% |
Ni |
Cr |
Fe |
Nb+Ta |
Co |
C |
Mn |
Si |
S |
Cu |
Al |
Ti |
|
X750 |
Min. |
70.0 |
14.0 |
5.0 |
0.7 |
0.4 |
2.25 |
||||||
|
Max. |
- |
17.0 |
9.0 |
1.2 |
1.0 |
0.08 |
1.0 |
0.5 |
0.01 |
0.5 |
1.0 |
2.75 |
|
Density |
8.28 g/cm³ |
|
Melting point |
1390-1430 ℃ |
|
Status
|
Tensile strength
Rm N/mm² |
Yield strength
Rp 0. 2N/mm² |
Elongation
As %
|
HB
|
|
Solution treatment
|
1267
|
868
|
25
|
≤400
|
Inconel X-750 Available Products in Sekonic Metals
Inconel X 750 Bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
Inconel X 750 Welding wire
Supply in welding wire and spring wire in coil form and cut length.
Inconel X 750 Spring
Spring with AMS5699 Standards according to clients drawing or specification
Inconel X 750 sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Inconel X750 seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
Inconel X-750 Heli-coil
Heli-Coil can be produced as standards size with small quantity
Inconel X750 strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
Inconel X 750 Fasteners
Alloy X 750 materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Inconel X 750 Tubing Hanger
Can be produced according to clients drawing or smaples with precision tolerance.
Inconel X-750 Features:
1.Good creep rupture strength at high temperatures
2.Not as strong as Nimonic 90
3.Very good at cryogenic temperatures
4.Age hardenable
5.High temperature dynamic applications
Inconel X-750 Application field：
• Nuclear reactors
• Gas turbines
• Rocket engines
• Pressure vessels
• Aircraft structures
