Manufacturer for Alloy C-276 Flanges - Titanium Bar – Sekonic
Manufacturer for Alloy C-276 Flanges - Titanium Bar – Sekonic Detail:
Titanium bar and Titanium Rod can be used in the drawing parts for its good elongation and excellent corrosion-resistance and most widely applied in pressure,vessel and used in some fittings parts and fastening pieces, like titanium fasteners. Titanium bar and titanium rod also can be widely used in the titanium alloys because of its comprehensive mechanical and chemical properties. In addition, titanium bar and titanium rod can be used in the golf clubs and bicycle girders and medical appliance.
Two types of Titanium rods are available: pure Titanium rods and Titanium alloy rods such as Ti-6AI-4V. They can be used in aircraft engines and parts, chemical equipment parts (reactors, pipes, heat exchangers and valves, etc.), ship hulls, bridges, medical implants, artificial bones, sporting products and consumer goods.
• Tittanium Bar Materials: Grade1, Grade 2, Grade 5, Grade 5, Grade7 ,Grade9,Grade11, Grade12, Grade 16, Grade23 ect
• Bar Shapes: Round Bar, Flat Bar, Hex Bar, Square bar
• Diameter:2.0mm-320mm, Length: 50mm-6000mm, Customized
• Conditions: Hot Forging & Hot Rolling,Cold Rolled, Annealed
• Standards: ASTMB348, AMS4928, AMS 4931B, ASTM F67, ASTM F136 etc
| Titanium Alloys Material Common Name | ||
|
Gr1 |
UNS R50250 |
CP-Ti |
|
Gr2 |
UNS R50400 |
CP-Ti |
|
Gr4 |
UNS R50700 |
CP-Ti |
|
Gr7 |
UNS R52400 |
Ti-0.20Pd |
|
G9 |
UNS R56320 |
Ti-3AL-2.5V |
|
G11 |
UNS R52250 |
Ti-0.15Pd |
|
G12 |
UNS R53400 | Ti-0.3Mo-0.8Ni |
|
G16 |
UNS R52402 | Ti-0.05Pd |
|
G23 |
UNS R56407 |
Ti-6Al-4V ELI |
♦ Titanium Bar Chemical Composition ♦
|
Grade |
Chemical composition, weight percent (%) |
||||||||||||
|
C (≤) |
O (≤) |
N (≤) |
H (≤) |
Fe (≤) |
Al |
V |
Pd |
Ru |
Ni |
Mo |
Other Elements Max. each |
Other Elements Max. total |
|
|
Gr1 |
0.08 |
0.18 |
0.03 |
0.015 |
0.20 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr2 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr4 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr5 |
0.08 |
0.20 |
0.05 |
0.015 |
0.40 |
5.5 6.75 |
3.5 4.5 |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr7 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
0.12 0.25 |
— |
0.12 0.25 |
— |
0.1 |
0.4 |
|
Gr9 |
0.08 |
0.15 |
0.03 |
0.015 |
0.25 |
2.5 3.5 |
2.0 3.0 |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr11 |
0.08 |
0.18 |
0.03 |
0.15 |
0.2 |
— |
— |
0.12 0.25 |
— |
— |
— |
0.1 |
0.4 |
|
Gr12 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
— |
— |
0.6 0.9 |
0.2 0.4 |
0.1 |
0.4 |
|
Gr16 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
0.04 0.08 |
— |
— |
— |
0.1 |
0.4 |
|
Gr23 |
0.08 |
0.13 |
0.03 |
0.125 |
0.25 |
5.5 6.5 |
3.5 4.5 |
— |
— |
— |
— |
0.1 |
0.1 |
♦ Titanum Alloy Bars Physical Properties ♦
|
Grade |
Physical properties |
|||||
|
Tensile strength Min |
Yield strength Min (0.2%,offset) |
Elongation in 4D Min (%) |
Reduction of Area Min (%) |
|||
|
ksi |
MPa |
ksi |
MPa |
|||
|
Gr1 |
35 |
240 |
20 |
138 |
24 |
30 |
|
Gr2 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr4 |
80 |
550 |
70 |
483 |
15 |
25 |
|
Gr5 |
130 |
895 |
120 |
828 |
10 |
25 |
|
Gr7 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr9 |
90 |
620 |
70 |
483 |
15 |
25 |
|
Gr11 |
35 |
240 |
20 |
138 |
24 |
30 |
|
Gr12 |
70 |
483 |
50 |
345 |
18 |
25 |
|
Gr16 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr23 |
120 |
828 |
110 |
759 |
10 |
15 |
♦ ♦ ♦ Titanium Alloy Materials Features: ♦ ♦ ♦
• Grade 1: Pure Titanium, relatively low strength and high ductility.
• Grade 2: The pure titanium most used. The best combination of strength
• Grade 3: High strength Titanium, used for Matrix-plates in shell and tube heat exchangers
• Grade 5: The most manufactured titanium alloy. Exceedingly high strength. high heat resistance.
• Grade 7: Superior corrosion resistance in reducing and oxidizing environments.
• Grade 9: Very high strength and corrosion resistance.
• Grade 12: Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11.
• Grade 23: Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for surgical implant application.
Product detail pictures:
Related Product Guide:
Why Nickel Based Alloys ?
Why Cobalt based Alloys
We have our own product sales staff, style crew, technical group, QC staff and package staff. We now have strict high quality management procedures for each approach. Also, all of our workers are experienced in printing subject for Manufacturer for Alloy C-276 Flanges - Titanium Bar – Sekonic , The product will supply to all over the world, such as: Norway, Montreal, Colombia, Custom orders are acceptable with different quality grade and customer's especial design. We are looking forward to establish the good and successful cooperation in business with long terms from the customers of all over the world.
By Alva from Canada - 2017.06.22 12:49
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Pearl Permewan from Belgium - 2018.02.04 14:13
