MP35N spring wire, MP35N fine wire, MP35N steel wire
MP35N spring wire, MP35N fine wire, MP35N steel wire,
MP35N flat steel, MP35N forgings, MP35N round cake, MP35N round steel, MP35N seamless pipe, MP35N steel plate, MP35N steel strip, MP35N straight bar, MP35N wire and matching welding materials, MP35N workpiece,
Common Trade Names: MP35N（UNS R30035）
MP35N is A non-magnetic nickel and cobalt chromium molybdenum alloy. High tensile strength ,up to 300ksi[2068MPa]) good ductility toughness And corrosion resistance Excellent resistance to vulcanization, high temperature oxidation and the performance of the hydrogen embrittlement .The unique performance is through work hardening, phase transformation and aging treatment. If used under the condition of fully work hardening, operating temperature is -200～315°C, and the maximum recommended temperature of 750 degrees Fahrenheit (399 degrees c)
MP35N Chemical Composition
|
C |
Mn |
P |
S |
Si |
Cr |
Ni |
Mo |
Co |
Ti |
B |
Te |
|
≦ 0.03 |
≦ 0.15 |
≦ 0.015 |
≦ 0.010 |
≦ 0.15 |
19.0 21.0 |
33.0 37.0 |
9.0 10.50 |
≧ 35.0 |
≦ 1.0 |
≦ 0.01 |
≦ 1.0 |
MP35N Physical Properties
| Density （g/cm3） |
Melting point （°C ） |
Expansion coefficient （m/(m·°C)（21-93°C）） |
| 8.43 | 1440 | 12.8×10E-6 |
MP35N Typical Mechanical Properties
| Condition | σb MPa |
σ0.2 MPa |
φ ％ |
Ψ ％ |
Hardness HRC |
| Solid solution +Cold working |
1758 | 1551 | 12 | 50 | 45 |
| Solid solution +Cold working +Ageing |
1792 | 1585 | 8 | 35 | 38min |
MP35N Standards and Specifications
AMS5758、 AMS5844、 AMS5845、ANSI/ASTM F56
MP35N Available Products in Sekonic Metals
MP35N Bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
MP35N Wire
Supply in welding wire and spring wire in coil form and cut length.
MP35N sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
MP35N Tube & Pipe
Standards size and customized dimension can be produced by us with small tolerance
MP35N strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
Inconel 718 Fasteners
MP35N materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Why MP35N ?
• Good resistance to Vulcanization, high temperature oxidation , crisp, salt fog and the most mineral acids.
• Good resistance to stress corrosion cracking in the harsh environment and high strength.
• High resistance to localized corrosion, such as pitting corrosion and crevice corrosion.
MP35N Application field：
MP35N alloy can be used for medical treatment, sea water, oil and gas Wells, chemistry and fastener, spring,
Magnetic components and equipment parts of the environment of food processing
MP35N is an aging hardened nickel-cobalt base alloy with a unique set of properties — ultra-high strength, toughness, ductility and excellent corrosion resistance.MP35N is resistant to corrosion in hydrogen sulfide, salt water and other chloride solutions.It also has excellent resistance to crevice corrosion and stress corrosion cracking in seawater and other harsh environments.Suitable for places where high strength, high modulus and good corrosion resistance are required.The alloy can also be used in medical devices and dental supplies
MP35N corresponds to UNS R30035, AWS 110
MP35N applicable standard: AMS 5844 ISO5832 NACE MR0175 / ISO 15156-3
