OEM manufacturer Invar Strip - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic

Product Detail

Our growth depends on the superior equipment ,exceptional talents and continuously strengthened technology forces for Slide pad, Monel 400 tubing hanger, MP35N, At present, company name has more than 4000 kinds of products and gained good reputation and big shares on market domestic and overseas.

OEM manufacturer Invar Strip - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic Detail:

Common Trade Names: 13-8Mo, PH13-8Mo, S51380, 04Cr13Ni8Mo2Al, xm-13,UNS S13800,Werkstoff 1.4548

PH13-8Mo stainless is a martensitic precipitation hardening stainless steel that has excellent strength, high hardness, superior toughness and good corrosion resistance. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content, and vacuum melting. Typical applications are large airframe structural components and injection molding equipment.

PH13-8Mo Chemical Compositons

C	Cr	Ni	Mo	Si	Mn	P	S	Al	N	Fe
≤ 0.05	12.25 13.25	7.5 8.5	2.0 2.5	≤ 0.1	≤ 0.2	≤ 0.01	≤ 0.008	0.9 1.35	≤ 0.01	Bal

PH13-8Mo Physical Properties

Density (g/cm³)	Melting point (℃)
7.76	1404-1471

PH13-8Mo Alloy Typical Mechanical Properties

Strength varies with heat treatment condition. The following table shows minimum mechanical properties for the various aged conditions, per AMS 5864

	H950	H1000	H1025	H1050	H1100	H1150
0.2 Offset Yield Strength, ksi	205	190	175	165	135	90
Ultimate Tensile Strength, ksi	220	205	185	175	150	135
Elongation in 2″, %	10	10	11	12	14	14
Reduction of Area, % (Longitudinal)	45	50	50	50	50	50
Reduction of Area, % (Transverse)	45	50	50	50	50	50
Reduction of Area, % (Short-Transverse)	35	40	45	45	50	50
Min Hardness, Rockwell	45	43	-	40	34	30

PH 13-8Mo Standards and Specifications

AMS 5629,ASTM A 564,EN 1.4548,UNS S13800,Werkstoff 1.4548

PH 13-8Mo Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

PH 13-8Mo Bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

Sheet & Plate

PH 13-8Mo sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.

inconel strip,invar stirp,kovar stirp

PH 13-8Mo strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Why PH13-8Mo ?

• High strength, good fracture toughness, transverse mechanical properties and stress corrosion resistance in Marine environment.
• Weldability：By an inert gas protection welding, also using most of the other welding process, including plasma welding, electron beam welding, And argon shielding gas is preferred.

PH13-8Mo Application field：

Widely used in aerospace, nuclear reactors and petrochemical and other fields, such as cold heading fasteners and
machining, aircraft components, reactor components and petrochemical equipment.

Product detail pictures:

Related Product Guide:
Why Nickel Based Alloys ?
Why Cobalt based Alloys

We pursue the administration tenet of "Quality is remarkable, Services is supreme, Status is first", and will sincerely create and share success with all customers for OEM manufacturer Invar Strip - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic , The product will supply to all over the world, such as: Ukraine, Thailand, Sudan, We can give our clients absolute advantages in product quality and cost control, and we have full range of molds from up to one hundred of factories. As product updating fast, we succeed in developing many high quality products for our clients and get high reputation.

36NiCrTiAl