OEM manufacturer Stellite 12 - Stainless Steel PH15-7MO – Sekonic

Product Detail

We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for Nimoinc 263 Sheet, GH3030 Manfuacture, 17-4PH Round bar, We sincerely count on exchange and cooperation with you. Allow us to move ahead hand in hand and attain win-win situation.
OEM manufacturer Stellite 12 - Stainless Steel PH15-7MO – Sekonic Detail:

Common Trade Names: Ph15-7Mo,15-7MoPH, S15700, 07Cr15Ni7Mo2Al ,W.Nr 1.4532

15-7M0Ph steel alloy can withstand all kinds of cold forming and welding process under the condition of austenite.Then through heat treatment can obtain 

the highest strength; Under 550 ℃ with excellent high temperature strength,was designed to have greater toughness than 17-4 PH. The  alloy is martensitic in structure in the annealed condition and is further strengthened by a relatively low temperature heat treatment which precipitates a copper containing phase in the alloy. 

Steel 15-7Mo Chemical Composition

C

Cr

Ni

Mo

Si

Mn

P

S

Al

≤0.09

14.0-16.0

6.5-7.75

2.0-3.0

≤1.0

≤1.0

≤0.04

≤0.03

0.75-1.5

Steel 15-7Mo Physical Properties

Density

(g/cm3)

Electrical resistivity

(μΩ·m)

7.8

0.8

Steel 15-7Mo Mechanical Properties

Condition бb/N/mm2 б0.2/N/mm2 δ5/% ψ HRW

Precipitation hardening

510℃

ageing

1320

1210

6

20

≥388

565℃

ageing

1210

1100

7

25

≥375

Steel Steel 15-7Mo Standards and Specifications

AMS 5659, AMS 5862,ASTM-A564 ,W. Nr./EN 1.4532

Steel 15-7Mo Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

Steel 15-7Mo Bars & Rods

Round bars/Flat bars/Hex bars,     Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

welding wire and spring wire

Steel 15-7Mo Wire

Supply in welding wire and spring wire in coil form and cut length.

Sheet & Plate

Steel 15-7Mo sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.


nickel-tube

Steel 15-7Mo seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

inconel strip,invar stirp,kovar stirp

Steel 15-7Mo strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Nimonic 80A, iNCONEL 718, iNCONEL 625, incoloy 800

Steel 15-7Mo Gasket/ Ring

Dimension can be customized with bright surface and precision tolerance.

Why Steel Steel 15-7Mo?

• Can withstand all kinds of cold forming and welding process under the condition of austenite.then through heat treatment can obtain the highest
  strength ,Under 550 ℃ with excellent high temperature strength.

• Electric welding property:The steel can adopt arc welding, resistance welding and gas shielded arc welding, gas shielded welding is the best.
     Welding is often done in materials solid solution treatment conditions,and do not need to preheat before welding.
     When welding requires high strength, the 17-7 with lower content of δ- ferrite is chosen mostly,austenitic stainless steel welding wire can be used

Steel 15-7Mo Application field:

Applied to make aviation thin-wall structure components, all kinds of containers, pipes, spring, valve film, ship shaft,
compressor plate, reactor components,  as well as a variety of structure components of chemical equipment, etc.


Product detail pictures:

OEM manufacturer Stellite 12 - Stainless Steel PH15-7MO  – Sekonic detail pictures


Related Product Guide:
Special Materials we offer
electropolished

It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for OEM manufacturer Stellite 12 - Stainless Steel PH15-7MO – Sekonic , The product will supply to all over the world, such as: France, Sao Paulo, Peru, We adhere to client 1st, top quality 1st, continuous improvement, mutual advantage and win-win principles. When cooperation together with the customer, we provide shoppers with the highest high-quality of service. Established good business relations using the Zimbabwe buyer inside the business, we've got established own brand and reputation. At the identical time, wholeheartedly welcome new and old prospects to our company to go to and negotiate small business.
  • As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
    5 Stars By Fay from Albania - 2017.09.22 11:32
    The sales manager is very patient, we communicated about three days before we decided to cooperate, finally, we are very satisfied with this cooperation!
    5 Stars By John biddlestone from Irish - 2017.12.19 11:10
    Write your message here and send it to us