One of Hottest for 1j85 - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic

Product Detail

We have been experienced manufacturer. Wining the majority of your crucial certifications of its market for Inconel 718 disck, stainless steel XM-12, 15-5ph steel pipe, We always hold the philosophy of win-win, and build long-term cooperation relationship with customers from around the world.We believe that our growth base on customer's success, credit is our life.

One of Hottest for 1j85 - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic Detail:

Common Trade Names: 13-8Mo, PH13-8Mo, S51380, 04Cr13Ni8Mo2Al, xm-13,UNS S13800,Werkstoff 1.4548

PH13-8Mo stainless is a martensitic precipitation hardening stainless steel that has excellent strength, high hardness, superior toughness and good corrosion resistance. Good transverse toughness properties are achieved by tight chemical composition control, low carbon content, and vacuum melting. Typical applications are large airframe structural components and injection molding equipment.

PH13-8Mo Chemical Compositons

C	Cr	Ni	Mo	Si	Mn	P	S	Al	N	Fe
≤ 0.05	12.25 13.25	7.5 8.5	2.0 2.5	≤ 0.1	≤ 0.2	≤ 0.01	≤ 0.008	0.9 1.35	≤ 0.01	Bal

PH13-8Mo Physical Properties

Density (g/cm³)	Melting point (℃)
7.76	1404-1471

PH13-8Mo Alloy Typical Mechanical Properties

Strength varies with heat treatment condition. The following table shows minimum mechanical properties for the various aged conditions, per AMS 5864

	H950	H1000	H1025	H1050	H1100	H1150
0.2 Offset Yield Strength, ksi	205	190	175	165	135	90
Ultimate Tensile Strength, ksi	220	205	185	175	150	135
Elongation in 2″, %	10	10	11	12	14	14
Reduction of Area, % (Longitudinal)	45	50	50	50	50	50
Reduction of Area, % (Transverse)	45	50	50	50	50	50
Reduction of Area, % (Short-Transverse)	35	40	45	45	50	50
Min Hardness, Rockwell	45	43	-	40	34	30

PH 13-8Mo Standards and Specifications

AMS 5629,ASTM A 564,EN 1.4548,UNS S13800,Werkstoff 1.4548

PH 13-8Mo Available Products in Sekonic Metals

Inconel 718 bar,inconel 625 bar

PH 13-8Mo Bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

Sheet & Plate

PH 13-8Mo sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.

inconel strip,invar stirp,kovar stirp

PH 13-8Mo strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Why PH13-8Mo ?

• High strength, good fracture toughness, transverse mechanical properties and stress corrosion resistance in Marine environment.
• Weldability：By an inert gas protection welding, also using most of the other welding process, including plasma welding, electron beam welding, And argon shielding gas is preferred.

PH13-8Mo Application field：

Widely used in aerospace, nuclear reactors and petrochemical and other fields, such as cold heading fasteners and
machining, aircraft components, reactor components and petrochemical equipment.

Product detail pictures:

Related Product Guide:
electropolished
Why Nickel Based Alloys ?

continue to enhance, to be certain solution top quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for One of Hottest for 1j85 - Stainless Steel Alloy PH13-8Mo(13-8PH) – Sekonic , The product will supply to all over the world, such as: Toronto, Colombia, Toronto, Abiding by our motto of "Hold well the quality and services, Customers Satisfaction", So we give our clients with high quality products and solutions and excellent service. Be sure to feel free to contact us for further information.

316 Stainless Steel Tube

3J01

ERNiCrMo-4

Hastelloy C22 Flange

Incoloy 925

inconel 601 sheet

Invar 36 plate

Stellite Shaft Sleeve

Super Duplex 2507 Pipe

Umco50

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!