Titanium Wire
Titanium Wire The titanium wire is usually used for welding, frames, surgical implants, decoration, electroplating hanging fixture.Used in the production of spherical titanium powder.
Wire use the titanium bar or Titanium slab tinto the mold to process, due to the pulling effect, the titanium bar deforms under high temperature when through the hole of the mould. The cross section is reduced, and the length increased. Stretching in a heated state helps to eliminate the internal stress and improve the plasticity of titanium wires. It effectively improves the precision of the titanium wire, and the surface finish, which can achieve a better comprehensive performance.
• Tittanium Wire Materials: Grade1, Grade 2, Grade 5, Grade 5, Grade7 ,Grade9,Grade11, Grade12, Grade 16, Grade23 ect
• Wire Forms: Spool in Coil, Cut length/Straight
• Diameter:0.05mm-8.0mm
• Conditions: Solution Annealed ,Hot rolling, Stretching
• Surface: Pickling White,Bright Polished , Acid Washed, Black oxide
• Standards: ASTM B863, AWS A5.16, ASTM F67, ASTM F136 etc
| Titanium Alloys Material Common Name | ||
|
Gr1 |
UNS R50250 |
CP-Ti |
|
Gr2 |
UNS R50400 |
CP-Ti |
|
Gr4 |
UNS R50700 |
CP-Ti |
|
Gr7 |
UNS R52400 |
Ti-0.20Pd |
|
G9 |
UNS R56320 |
Ti-3AL-2.5V |
|
G11 |
UNS R52250 |
Ti-0.15Pd |
|
G12 |
UNS R53400 | Ti-0.3Mo-0.8Ni |
|
G16 |
UNS R52402 | Ti-0.05Pd |
|
G23 |
UNS R56407 |
Ti-6Al-4V ELI |
♦ Titanium Wire Chemical Composition ♦
|
Grade |
Chemical composition, weight percent (%) |
||||||||||||
|
C (≤) |
O (≤) |
N (≤) |
H (≤) |
Fe (≤) |
Al |
V |
Pd |
Ru |
Ni |
Mo |
Other Elements Max. each |
Other Elements Max. total |
|
|
Gr1 |
0.08 |
0.18 |
0.03 |
0.015 |
0.20 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr2 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr4 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr5 |
0.08 |
0.20 |
0.05 |
0.015 |
0.40 |
5.5- 6.75 |
3.5 4.5 |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr7 |
0.08 |
0.25 |
0.03 |
0.015 |
0.30 |
— |
— |
0.12 0.25 |
— |
0.12 0.25 |
— |
0.1 |
0.4 |
|
Gr9 |
0.08 |
0.15 |
0.03 |
0.015 |
0.25 |
2.5 3.5 |
2.0 3.0 |
— |
— |
— |
— |
0.1 |
0.4 |
|
Gr11 |
0.08 |
0.18 |
0.03 |
0.15 |
0.2 |
— |
— |
0.12 0.25 |
— |
— |
— |
0.1 |
0.4 |
|
Gr12 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
— |
— |
0.6 0.9 |
0.2 0.4 |
0.1 |
0.4 |
|
Gr16 |
0.08 |
0.25 |
0.03 |
0.15 |
0.3 |
— |
— |
0.04 0.08 |
— |
— |
— |
0.1 |
0.4 |
|
Gr23 |
0.08 |
0.13 |
0.03 |
0.125 |
0.25 |
5.5 6.5 |
3.5 4.5 |
— |
— |
— |
— |
0.1 |
0.1 |
♦ Titanum Alloy Wire Physical Properties ♦
|
Grade |
Physical properties |
|||||
|
Tensile strength Min |
Yield strength Min (0.2%,offset) |
Elongation in 4D Min (%) |
Reduction of Area Min (%) |
|||
|
ksi |
MPa |
ksi |
MPa |
|||
|
Gr1 |
35 |
240 |
20 |
138 |
24 |
30 |
|
Gr2 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr4 |
80 |
550 |
70 |
483 |
15 |
25 |
|
Gr5 |
130 |
895 |
120 |
828 |
10 |
25 |
|
Gr7 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr9 |
90 |
620 |
70 |
483 |
15 |
25 |
|
Gr11 |
35 |
240 |
20 |
138 |
24 |
30 |
|
Gr12 |
70 |
483 |
50 |
345 |
18 |
25 |
|
Gr16 |
50 |
345 |
40 |
275 |
20 |
30 |
|
Gr23 |
120 |
828 |
110 |
759 |
10 |
15 |
♦ ♦ ♦ Titanium Alloy Materials Features: ♦ ♦ ♦
• Grade 1: Pure Titanium, relatively low strength and high ductility.
• Grade 2: The pure titanium most used. The best combination of strength
• Grade 3: High strength Titanium, used for Matrix-plates in shell and tube heat exchangers
• Grade 5: The most manufactured titanium alloy. Exceedingly high strength. high heat resistance.
• Grade 9: Very high strength and corrosion resistance.
• Grade 12: Better heat resistance than pure Titanium. Applications as for Grade 7 and Grade 11.
• Grade 23: Titanium-6Aluminum-4Vanadium for surgical implant application.
