Top Suppliers Nimonic 80a - Stainless Steel Nitronic 60 bar/ Pipe/Ring /Sheet – Sekonic
Top Suppliers Nimonic 80a - Stainless Steel Nitronic 60 bar/ Pipe/Ring /Sheet – Sekonic Detail:
Common Trade Names: Nitronic 60, Alloy 218,UNS S21800
Nitronic 60 is known for its excellent galling resistance, even at elevated temperatures. The additions of 4% silicon and 8% manganese inhibit wear, galling, and fretting. It is commonly used for various fasteners and pins that require strength and resistance to galling. It maintains decent strength up to temperatures of 1800°F and has oxidation resistance similar to that of 309 stainless steel. The general corrosion resistance is between that of 304 and 316 stainless steel.
Nitronic 60 Chemical Composition
|
Alloy |
% |
Ni |
Cr |
Fe |
C |
Mn |
Si |
N |
P |
S |
|
Nitronic 60 |
Min. |
8 |
16 |
59 |
|
7 |
3.5 |
0.08 |
|
|
|
Max. |
9 |
18 |
66 |
0.1 |
9 |
4.5 |
0.18 |
0.04 |
0.03 |
Nitronic 60 Physical Properties
| Density | 8.0 g/cm³ |
| Melting point | 1375 ℃ |
Nitronic 60 Mechanical Properties
|
Alloy status |
Tensile strength Rm N/mm² |
Yield strength RP0.2 N/mm² |
Elongation A5 % |
Brinell hardness HB |
| Solution treatment |
600 |
320 |
35 |
≤100 |
Nitronic 60 Standards and Specifications
AMS 5848,ASME SA 193, ASTM A 193
Nitronic 60 Available Products in Sekonic Metals
Nitronic 60 Bars & Rods
Round bars/Flat bars/Hex bars,Size From 8.0mm-320mm, Used for bolts,fastners and other parts
Nitronic 60 Wire
Supply in welding wire and spring wire in coil form and cut length.
Nitronic 60 sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Nitronic 60 seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
Nitronic 60 strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
Nitronic 60 Fasteners
Nitroinc 60 materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Why Nitronic 60 ?
• Nitronic 60 Stainless Steel provides a significantly lower cost way to fight galling and wear compared with cobalt-bearing and high nickel alloys. Its uniform corrosion resistance is better than type 304 in most media. In Nitronic 60 ,chloride pitting is superior to Type 316
• Yield strength at room temperature is nearly twice that of 304 and 316
• Nitronic 60 provides excellent high temperature oxidation resistance and low-temperature impact resistance
Nitronic 60 Application field：
Used extensively in the Power, Chemical, Petrochemical, Food and Oil & Gas industries with an array of uses including expansion joint wear plates, pump wear rings, bushings, process valve stems, seals and logging equipment.
Product detail pictures:
Related Product Guide:
Why Cobalt based Alloys
Why Nickel Based Alloys ?
We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for Top Suppliers Nimonic 80a - Stainless Steel Nitronic 60 bar/ Pipe/Ring /Sheet – Sekonic , The product will supply to all over the world, such as: United Arab emirates, Anguilla, Guatemala, Our solutions have national accreditation standards for experienced, premium quality goods, affordable value, was welcomed by people around the globe. Our products will continue to increase in the order and look forward to cooperation with you, Truly must any of people goods be of interest to you, make sure you letus know. We're likely to be delighted to give you a quotation up on receipt of one's in depth specs.
By Phoenix from Accra - 2017.02.14 13:19
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Amy from Suriname - 2017.05.02 11:33
