2021 wholesale price Nickel Alloy Bar - Monel K500 Bar/Wire/sheet/Ring – Sekonic

Common Trade Names: Monel K500, Nickel Alloy K500, Alloy K500, Nickel K500,UNS N05500,W.Nr. 2.4375

Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F.

Monel K500 Chemical Composition

Monel K500 Physical properties

Monel K500 Alloy minimum mechanical properties in the roomtemperature

Monel K500 Standards and Specifications

Monel K500 Available Products in Sekonic Metals

Monel K500 Bars & Rods

Round bars/Flat bars/Hex bars,     Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts

Monel K500 Wire

Supply in welding wire and spring wire in coil form and cut length.

Monel K500 washer & gasket

Dimension can be customized with bright surface and precision tolerance.

Monel K500 sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm  to 100mm.

Monel K500 seamless tube & Welded pipe

Standards size and  customized dimension can be produced by us with small tolerance

Monel K500 fasetners

Alloy 718 materials  in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Monel K500 strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Monel K500 Tubing Hanger

Can be produced according to clients drawing or smaples with precision tolerance.

Why Monel K500?

• Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
• Excellent resistance to high velocity sea water
• Resistant to a sour-gas environment
• Excellent mechanical properties from sub-zero temperatures up to about 480C
• Non-magnetic alloy

Monel K500 Application field：

• Sour-gas service applications
• Oil and gas production safety lifts and valves
• Oil-well tools and instruments like drill collars
• Oil well industry
• Doctor blades and scrapers
• Chains, cables, springs, valve trim, fasteners for marine service
• Pump shafts and impellers in marine service