Good Wholesale Vendors Invar Plate - Stainless steel 17-7PH – Sekonic
Good Wholesale Vendors Invar Plate - Stainless steel 17-7PH – Sekonic Detail:
Common Trade Names: 17-7PH,SUS631,S17700,07Cr17Ni7Al,W.Nr.1.4568
17-7PH is austenitic-martensitic precipitation hardening stainless steel developed on the basis of 18-8CrNi, also known as controlled phase change stainless steel.At the solution treating temperature, 1900°F, the metal is austenitic but undergoes transformation to a low-carbon martensitic structure during cooling to room temperature. This transformation is not complete until the temperature drops to 90°F. Subsequent heating to temperatures of 900-1150°F for one to four hours precipitation strengthens the alloy. This hardening treatment also tempers the martensitic structure, increasing ductility and toughness
17-7PH Chemical Composition
| C | Cr | Ni | Si | Mn | P | S | Al |
| ≤0.09 | 16.0-18.0 | 6.5-7.75 | ≤1.0 | ≤1.0 | ≤0.04 | ≤0.03 | 0.75-1.5 |
17-7PH Physical Properties
| Density (g/cm3) | Melting point（℃） |
| 7.65 | 1415-1450 |
17-7PH Mechanical Properties
| Condition | бb/N/mm2 | б0.2/N/mm2 | δ5/% | ψ | HRW | |
| Solution treatment | ≤1030 | ≤380 | 20 | － | ≤229 | |
| Precipitationhardening | 510℃ageing | 1230 | 1030 | 4 | 10 | ≥383 |
| 565℃ageing | 1140 | 960 | 5 | 25 | ≥363 | |
17-7PH Standards and Specifications
AMS 5604, AMS 5643, AMS 5825,ASME SA 564, ASME SA 693, ASME SA 705, ASME Type 630,ASTM A 564, ASTM A 693, ASTM A 705, ASTM Type 630
Condition A – H1150,ISO 15156-3,NACE MR0175,S17400,UNS S17400,W. Nr./EN 1.4548
| Bar/Rod | Wire | Strip/Coil | Sheet/Plate | Pipe/Tube |
17-7PH Available Products in Sekonic Metals
17-7PH Bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
17-7PH Wire
Supply in welding wire and spring wire in coil form and cut length.
17-7PH sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
17-7PH seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
17-7PH strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
17-7PH Fasteners
17-7PH materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Why 17-7 PH?
• High tensile strength and hardness to 600°F
• Corrosion resistant
• Excellent oxidation resistance to about 1100°F
• Creep-rupture strength to 900°F
17-7 PHApplication field：
• Gate valves
• Chemical processing equipment
• Pump shafts, gears, plungers
• Valve stems, balls, bushings, seats
• Fasteners
Product detail pictures:
Related Product Guide:
Special Materials we offer
Why Nickel Based Alloys ?
Always customer-oriented, and it's our ultimate target to be not only the most reliable, trustable and honest supplier, but also the partner for our customers for Good Wholesale Vendors Invar Plate - Stainless steel 17-7PH – Sekonic , The product will supply to all over the world, such as: Costa rica, Mongolia, Bahamas, If any item be of interest to you, you should let us know. We will try our best to satisfy your requirements with high quality goods, the best prices and prompt delivery. You should feel free to contact us at any time. We will reply you when we receive your inquiries. Make sure you note that samples are available before we start our business.
By Mark from Indonesia - 2018.12.11 14:13
Factory equipment is advanced in the industry and the product is fine workmanship, moreover the price is very cheap, value for money!
By Maureen from San Diego - 2017.11.12 12:31
