Inconel 602CA BAR /sheet / tube /Strip
Common Trade Names: 602 CA; alloy602 СА;UNS N06025; W.Nr 2.4633
Inconel 602 CA alloy is the most oxidation resistant/high strength nickel alloy available. It is capable of extreme temperature use up to and beyond 2200°F (1200°C). For thermal processing applications where minimal product contamination is necessary, the oxidation/scaling resistance of Inconel 602 CA is extremely desirable. A high chromium content, along with aluminum and yttrium additions, allows the alloy to develop a tightly adhering oxide scale.
A relatively high carbon content combined with the alloying additions of titanium and zirconium results in high creep rupture strength. Inconel 602 CA provides 150% of the strength of other commonly used nickel alloys such as alloy 600.
| Alloy |
% |
Cr |
Cu | Ni | P | S | Fe | C | Al | Ti | Y | Zr | Si | Mn |
|
602CA |
Min. |
24.0 | - |
balance |
- | - | 8.0 | 0.15 | 1.8 | 0.1 | 0.05 | 0.01 | - | - |
|
Max. |
26.0 | 0.1 | 0.02 | 0.01 | 11.0 | 0.25 | 2.4 | 0.2 | 0.12 | 0.1 | 0.5 | 0.15 |
|
Density
|
0.285 lb/in3
|
|
Melting point
|
2350 - 2550°F
|
Representative Tensile Properties
| Temperature, ° F | 68 | 1000 | 1500 | 1600 | 1800 | 2000 | 2200 |
| Ultimate Tensile Strength, ksi | 105 | 93.4 | 41.2 | 32.8 | 17.1 | 13 | 5.8 |
| 0.2%Yield Strength, ksi | 50.5 | 38.3 | 34.8 | 28.7 | 15.2 | 11.6 | 5.0 |
| Elongation, % | 38 | 43 | 78 | 82 | 78 | 85 | 96 |
Typical Creep- Rupture Properties
| Temperature, °F | 1400 | 1600 | 1800 | 1900 | 2000 | 2100 |
| Minimum Creep 0.0001%/Hour, ksi | 9.4 | 2.4 | 0.96 | 0.59 | -- | -- |
| 10,000 Hour Rupture Strength, ksi | 11.3 | 3.2 | 1.5 | 0.99 | 0.67 | 0.44 |
Inconel 602CA Standards and Specifications
ASME Code Case 2359, ASME SB 166, ASME SB 168, ASTM B 166, ASTM B 168, ERNiCrFe-12, UNS N06025, W. Nr./EN 2.4633
| Bar/Rod | Wire | Strip/Coil | Sheet/Plate |
| ASTM B166;ASME SB166 | ASTM B166;ASME SB166 | ASTM B168;ASME SB168 | ASTM B168;ASME SB168 |
Inconel 602CA Available Products in Sekonic Metals
Inconel 602CA bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fastners and other spare parts
Inconel 602CA welding wire & Spring wire
Supply in welding wire and spring wire in coil form and cut length.
Inconel 602CA sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Inconel 602CA seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
Inconel 602CA Forging Ring
Forging Ring or gasket,size can be customized with bright surface and precision tolerance
Inconel 602CA strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
Inconel 602CA Flange
Standards size and customized dimension can be produced by us with precision tolerance
Why Inconel 602CA?
1.Outstanding resistance to cyclic oxidation through 2250°F (1232°C)
2.Excellent high temperature creep strength
3.Resistant to carburizing and nitriding environments
4.Highly resistant to grain growth in service
5.Superior behavior in oxidizing/chloridizing environments
6.Good resistance to metal dusting
Inconel 602CA Application field：
• Calciners for mineral processing
• Heat treating muffles and retorts
• Chemical vapor deposition retorts
• Vacuum furnace fixtures
• Nitric acid catalyst support grids
• Molten glass processing equipment
• Radiant heating tubes
• Carbon fiber production
