Inconel 718 Disc Ring/ Washer /gasket/ jonit ring
Inconel 718 Disc Ring, Washer, Gasket, Jonit Ring
♦ Material: Inconel 718
♦ Size:M8-M36 or as per clients requirements
♦ OD 15.5-66.0mm ID:8.4-37.0mm
♦ Thickness:1.4mm-5.6mm or as per clients requiriments
♦ Application ：Aero-engine parts and Aerospace structural parts
♦ Other Meaterials : Inconel 625, Inconel x750 ect
Inconel® 718 is a precipitation-hardening nickel-chromium alloy with a high strength and good ductility up to 1300°F (704°C). this Alloy containing significant amounts of iron, columbium, and molybdenum, along with lesser amounts of aluminum and titanium.Nickel 718 also has relatively good weldability, formability, and excellent cryogenic properties compared to other precipitation hardening nickel alloys. The sluggish precipitation hardening response of this alloy allows it to be readily welded without hardening or cracking. Alloy 718 is non-magnetic. It maintains good corrosion resistance and oxidation resistance and is used for parts requiring high resistance to creep and stress rupture up to 1300°F (704°C) and oxidation resistance up to 1800°F (982°C).
| Alloy |
% |
Ni |
Cr |
Fe |
Mo |
Nb |
Co |
C |
Mn |
Si |
S |
Cu |
Al |
Ti |
|
718 |
Min. |
50 |
17 |
balance |
2.8 |
4.75 |
0.2 |
0.7 |
||||||
|
Max. |
55 |
21 |
3.3 |
5.5 |
1 |
0.08 |
0.35 |
0.35 |
0.01 |
0.3 |
0.8 |
1.15 |
|
Density
|
8.24 g/cm³
|
|
Melting point
|
1260-1320 ℃
|
|
Status
|
Tensile strength
Rm N/mm² |
Yield strength
Rp 0. 2N/mm² |
Elongation
As % |
Brinell hardness
HB
|
|
Solution treatment
|
965
|
550
|
30
|
≤363
|
Inconel 718 Available Products in Sekonic Metals
Inconel 718 Bars & Rods
Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm, Used for bolts,fasteners and other spare parts
Inconel 718 welding wire & Spring wire
Supply in welding wire and spring wire in coil form and cut length.
Inconel 718 washer & gasket
Dimension can be customized with bright surface and precision tolerance.
Inconel 718 sheet & plate
Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.
Inconel 718 seamless tube & Welded pipe
Standards size and customized dimension can be produced by us with small tolerance
Inconel 718 Spring
Spring with AMS5699 Standards according to clients drawing or specification
Inconel 718 strip & coil
Soft condition and hard condition with AB bright surface, width up to 1000mm
Alloy 718 Gas Tubing Hanger
Can be produced according to clients drawing or smaples with precision tolerance.
Inconel 718 Fasetners
Alloy 718 materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.
Why Inconel 718 ?
Inconel 718 is Austenitic structure, precipitation hardening generate “γ” made it excellent mechanical performance. G rain boundary generate “δ” made it the best plasticity in the heat treatment.with extremely resistance to stress corrosion cracking and pitting ability in high temperature or low temperature environments, especially the inoxidability in the high temperature.
1.workability
2.High tensile strength,endurance strength,creep strength and rupture strength at 700℃.
3.High inoxidability at1000℃.
4.Steady mechanical performance in the low temperature.
Inconel 718 Application field：
The elevated temperature strength, excellent corrosion resistance and workability at 700℃ properties made it use in a wide range of high requirement environments.Inconel grades are fit for use in the production of components that are employed in the severe environments such as turbocharger rotors & seals, motor shafts for electric submersible well pump, steam generators, tubes for heat exchangers, firearm sound suppressor blast baffles and in machine guns, black box recorders in aeroplanes etc.
• Steam turbine
• Liquid-fuel rocket
• Cryogenic engineering
• Acid environment
• Nuclear engineering
