Nimonic 90 Bar/Rod/Spring/Bolt

Product Detail

Common Trade Names: Nimonic 90, Alloy 90, UNS N07090/W. Nr. 2.4632

This Alloy is a wrought nickel-chromium-cobalt base alloy strengthened by additions of titanium and aluminum. It has been developed as an age-hardenable creepresisting alloy for service at temperatures up to 920°C(1688°F.The alloy is used for turbine blades, discs, forgings,ring sections and hot-working tools.

Nimonic 90 Chemical Composition

≤

0.13

0.015

0.02

0.8

0.4

2.0-3.0

15.0-21.0

18.0-21.0

≤1.5

≤0.15

≤0.2

≤0.02

1.0-2.0

Nimonic 90 Physical Properties

Density (g/cm³)	Melting point (℃)	Thermal conductivity (W/m·℃)	Elastic modulus （MPa）	Thermal expansion coefficient （ 10^-6℃^-1）
8.2	1400	21.76(100℃)	225	12.71(20-100℃)

Nimonic 90 Typicla Mechanical Properties

Heat treatment	Tensile strength (MPa)	Yield strength (MPa)	Elongation (%)
Solution treatment	820	590	8

Nimoinc 90 Standards and Specifications

Bar/Rod	Wire	Strip/Coil	Sheet/Plate	Pipe/Tube
BS HR2, HR501, HR502 and HR503; SAE AMS 5829; AECMA PrEN 2295, 2296 2297, 2400, 2401, 2669 and 2670.		BS HR202, AECMA PrEN 2298		BS HR402, AECMA PrEn 2299

Nimonic 90 Available Products in Sekonic Metals

Nimonic 90 Bars & Rods

Round bars/Flat bars/Hex bars, Size From 8.0mm-320mm,Used for bolts,fasteners and other spare parts

Nimonic 90 welding wire & Spring wire

Supply in welding wire and spring wire in coil form and cut length.

Nimoinc 90 washer & gasket

Dimension can be customized with bright surface and precision tolerance.

Nimonic 90 sheet & plate

Widths up to 1500mm and lengths up to 6000mm,Thickness from 0.1mm to 100mm.

Nimoinc 90 seamless tube & Welded pipe

Standards size and customized dimension can be produced by us with small tolerance

Nimoinc 90 Spring

Spring with AMS5289 Standards according to clients drawing or specification

Nimonic 90 strip & coil

Soft condition and hard condition with AB bright surface, width up to 1000mm

Nimoinc 90 Fasteners

Alloy 90 materials in forms of Bolts,screws,flanges and other fasterners, according to clients specification.

Why Nimonic 90 ?

This alloy is mainly strengthening phase γ'i3(Ti、). Aging deformation of cobalt nickel base superalloy, containing a high amount of cobalt and

a variety of reinforcement element, higher tensile strength and creep resistance in 815 ~ 870 ℃ , good resistance to oxidation and corrosion resistance,

in cold and hot again and again under the action of alternating, showing high fatigue strength and good formability and weldability